Downloads
Self Training
Tutorial Videos
Welcome to the MTX/MRX series Tutorial Videos. We are going to show you the main points that are going to help you achieve results, without having to spend days reading a manual. *English Subtitles (and more subtitles on some videos) are available.
MTX/MRX Series
-
Overview
MTX/MRX series are designed primarily for multi-zone commercial installation and are equipped with flexible processing functions that are essential to a wide variety of application. This is an introduction to Yamaha’s MTX and MRX DSP processor.
-
Overview: I/O
A closer look at the inputs and outputs of the MTX and MRX processors and provide an overview of the processing available in each one.
MTX Series
-
MTX Overview 1
This video will give an introduction to the Yamaha MTX Series (MTX3, MTX5-D).
-
MTX Overview 2
A further look to the Yamaha MTX Series (MTX3, MTX5-D) as well as a guide to the simple editing software MTX-MRX Editor.
DSP
-
Dugan Automixer
The Dan Dugan algorithm clearly share the mic gain between the microphone without any audible signs of gating or other artefacts. We will take a further look into the Dan Dugan Automixer or MTX/MRX processors.
-
FBS ( Feedback Suppressor )
This video will explain how the FBS on MRX and MTX processor works to prevent feedback effectively.
MTX/MRX Remote Control
-
Introduction of Remote Control
MTX/MRX system provides a various solutions of the remote control. This video will give a brief introduction to these solutions.
-
Wall-Mount Controller MCP1
The Yamaha MCP1 is an advanced wall-mount controller for controlling an MTX or MRX System. It allows the user to control their system remotely with more functions than a DCP and with a higher security level. This video will show you how to set up the MCP1 to the system.
-
Digital Control Panel - DCP Series
Digital Control Panel (DCP) is a simple solution to control all the sophisticated programming of MTX/MRX processor. Let's take a closer look at the features and learn how to setup the DCPs with the MTX-MRX Editor.
-
Digital Controller Hub - DCH8
DCH8 extends the flexibility of the DCP's configurations. Take a closer look to the device and learn how to connect the DCPs together with DCH8.
-
Wireless DCP
Wireless DCP extends the flexibility with the use of smart devices. It provides the same functions of DCP while no cabling is required. This video will explain how to setup the Wireless DCP.
ProVisionaire Touch
-
01 How to setup and create RCSL file with MTX-MRX Editor
ProVisionaire Touch is a powerful remote control solution of MTX/MRX that allows user to customise the user interface completely. Let's take a closer look to the features and learn how to setup and create RCSL file with MTX-MRX Editor.
-
02 How to design the user interface
ProVisionaire Touch is a powerful remote control solution of MTX/MRX that allows to user to customise the user interface completely. Let's learn how to design the user interface.
-
03 How to assign parameters and get provisionaire touch online
ProVisionaire Touch is a powerful remote control solution of MTX/MRX that allows to user to customise the user interface completely. Let's learn how to get online with the MTX/MRX processor.
-
04 More features of ProVisionaire Touch
ProVisionaire Touch allows user to control various Yamaha products, including the Blue-ray players and CD players/AV Receivers with MusicCast enabled, as well as "Disklavier Enspire" reproducing pianos. Let's take a further look at the features of ProVisionaire Touch.
Paging Station Microphone PGM1, Extension PGX1
-
PGM1, PGX1
Yamaha's PGM1/PGX1 are paging stations that can be used with the MTX5-D or MRX7-D. It can be networked via a Dante Network and using Power Ethernet or PoE. This video will show you how to set up the paging station to the system.
Audio Networking
Documents
FAQ
-
What does YDIF mean?
-
What is the maximum cable length that can be used with YDIF?
-
What cable should I use to connect up YDIF?
-
What is the Distribution Mode on the YDIF?
-
What is the Cascade Mode on the YDIF?
-
How many devices (e.g. MTX3, MTX5-D, MRX7-D, EXi8, EXo8, and XMV amplifiers) with YDIF connectivity can be connected together?
-
Can a Dante-compatible device, such as an MTX5-D, MRX7-D, XMV4140-D, or XMV4280-D, exchange audio signals with another Dante-compatible device?
-
Do Dante enabled devices such as MTX5-D, MRX7-D and XMV-D require separate Ethernet cables to exchange control signals and audio signals?
-
Is it possible to control the head amp of an external device (such as an EXi8 or a Rio3224-D) using MTX-MRX Editor?
-
Is it possible for other Yamaha devices (aside from MTX3, MTX5-D and MRX7-D) to control the head amp of MTX/MRX series devices (EXi8, MTX3, MTX5-D, MRX7-D)?
-
Which models support YDIF and Dante?
-
Which types and formats of SD memory card can be used with an MTX/MRX processor?
-
Which audio file formats can be played back on the SD card player?
-
What is an AGC (auto gain controller)?
-
What is an ANC (ambient noise compensator)?
-
What is an FBS (feedback suppressor)?
-
Can an FBS (feedback suppressor) automatically detect the feedback frequency?
-
How many presets can be stored on an MTX/MRX processor?
-
Can Preset Recall be used to make multiple MTX/MRX processors operate in conjunction with one another?
-
What operations can I perform from the front panel on an MTX/MRX processor?
-
Is the 8-channel mic/line (analog Euroblock) input on an MTX/MRX processor equipped with phantom power?
-
Is it possible to control an MTX/MRX processor using MIDI signals from an external controller?
-
What are the differences between the MTX3 and the MTX5-D?
-
What is the required operating environment for MTX-MRX Editor?
-
Is it possible to control an MTX/MRX processor using an AMX or Crestron touch screen panel?
-
What is the RS-232C port used for?
-
How many DCP control panels can be connected?
-
What is the greatest distance at which a DCP control panel can be connected to an MTX/MRX processor?
-
Is it possible to control multiple MTX/MRX processors within a system from a DCP or GPI controller, or from Wireless DCP?
-
How many devices can we connect to host devices such asMTX series or MRX7-D?
-
Is it possible to connect to any Network Switches?
-
What can be done with the Wireless DCP iPhone application?
-
How should I connect the network devices in order to control the MTX/MRX processor using the Wireless DCP iPhone application?
-
How many remote controllers (Wireless DCP, ProVisionaire Touch, AMX/Crestron) can be used with one MTX/MRX?
-
Is it possible to create a custom control panel using the Wireless DCP iPhone application?
-
Can I use the Wireless DCP iPhone application on an iPad or iPod Touch?
-
Is it possible to control multiple MTX/MRX devices with one ProVisionaire Touch?
-
Is it possible to control one MTX/MRX device with multiple ProVisionaire Touch?