Can be scrolled
| General specifications | Speaker type | Full-range, powered speaker, bass reflex | |
|---|---|---|---|
| Frequency range (-10dB) | 80Hz - 20kHz *1 | ||
| Nominal coverage | H | 170° | |
| V | 25° (+12.5° - -12.5°) | ||
| Effective coverage (-10dB) | H | 180° | |
| V | 30° (+15° - -15°) | ||
| Components | LF-HF | 1.5"(3.75cm) Cone x 16 | |
| Maximum output level (1m; on axis) | 102 dB SPL (when using PoE+(IEEE 802.3at)) *2 | ||
| Power rating | Dynamic | 15W (PoE+ (IEEE 802.3 at)), 6W (PoE (IEEE 802.3 af)) | |
| Continuous | 15W (PoE+ (IEEE 802.3 at)), 6W (PoE (IEEE 802.3 af)) | ||
| I/O connectors | RJ-45 (Dante) x１ | ||
| Protection circuit | Speaker processing | Clip limiting, Integral power protection | |
| Amplifier protection | Over current protection, Over temperature protection, Under voltage lock out, DC detection, Clock detection | ||
| Power supply protection | Over load protection, Over voltage protection, Under voltage lock out | ||
| Cooling | Natural convection | ||
| Power requirements | PoE+(IEEE 802.3at), PoE(IEEE 802.3af) | ||
| Power consumption | Idle: 3W, 1/8(Pink Noise): 6W (PoE+(IEEE 802.3at)), 4.3W (PoE(IEEE 802.3af)) | ||
| Finish | VXL1B-16P: Black painting (approximate value: Munsell N3.0), VXL1W-16P: White painting (approximate value: Munsell N9.0) | ||
| Magnetic shielding | No | ||
| Dust and water resistant | No | ||
| Accessories | Mounting bracket x2, Bracket base x2, Safety wire x1, Machine screws (M5x10) x2, Template x1, Owner's manual | ||
| Options | WMB-L1B (W), HCB-L1B, PA-L1B | ||
| Packaging | Packaged in 1 pc | ||
| Dimensions (W x H x D) | W54 x H1120 x D104 mm (Speaker only) | ||
| Weight | 5.0kg (Speaker only) | ||
*1: Half-space (2π)
*2: Measured peak SPL with IEC noise at 2m; value converted to 1m is shown (frequency range: 100 Hz - 10 kHz)
